Set up costs

Setting machines

Set operations

Logic Print Help

I start

Prepare a budget

Set my costs

From the main screen, click on the link "Configure pre and post print" to display the list of defined operations. The default is to include pre and post operations typical printing. You should modify their costs and features to suit their own business. You can also add operations. You can copy any of the operations to expedite the process. You can delete operations which is not used.

Costing.'s Operations before and after printing can be calculated on an hourly or units / cycles. For hourly calculation must enter the hourly cost of operation and whether the number of hours to apply in each work should be calculated automatically or manually entered in each budget. If you choose to calculate the hours automatically be defined by productivity (output per hour) of the transaction, which may be an average value or may vary according to the roll or quantity.

In the case of calculating the cost per unit is allowed similarly define a fixed cost or cost escalation based on the amount.

Features: Select whether the operation is a fixed cost, which increases with spin. For example shooting. Can also indicate whether an operation is external (outsourced). In this case you can indicate whether the percentage of profit to apply to this operation must be the overall budget, or be a particular percentage.

Filling the field units: This option allows you to streamline the filling of the window of the budget. Enter the concept with corresponding units of the operation. Shown below are some examples:

Glazing: Applies to the square meters of sheet
Sewn staple: corresponds to the number of copies
Filming: Corresponds to the number of plates
Filming per cm2: Corresponds with centimeters square plates
Cleft corresponds to the number of copies
Transport Kg: Applies to the total number of printed kgs